New Makerfern for Chrome: right-click any picture on the web to make a cut file, coloring page or stencil from it. Add to Chrome, free

Silhouette cut lines · 10 min read

Silhouette Studio cutting inner lines? Keep only the outer edge

Cut only the outer edge in Silhouette Studio. Choose Cut Edge, check holes and duplicate contours, or use Trace Outer Edge for a PNG.

Published 4 October 2026

To cut only the outside of a Silhouette Studio design, select the intended artwork in Send and try Cut Edge, then inspect the bold cut preview before sending. If an inner line remains, it may be a true hole in a compound path or a separate selected cut shape. For a PNG or JPG, create the contour with Trace Outer Edge; simply changing a raster image to Cut can cut its rectangular image boundary.

Silhouette’s cut-line and tracing documentation distinguishes Cut, Cut Edge, No Cut and Trace Outer Edge. Its Print & Cut guide shows the key exception: Cut Edge may still cut an actual hole. This guide is about extra interior contours, not the registration-mark scanning problem or DXF scale.

Find which line the machine would actually cut

Open Send with the artwork selected. Silhouette documents three settings: Cut activates all lines of the selected design; Cut Edge targets its outside edge; No Cut disables the selected lines. The thicker cut preview is more useful than the color of a line on the design canvas. Zoom in around letters, holes and overlapping shapes. If the unwanted line is still active in Send, do not send a full sheet as a test.

Try selecting only the intended sticker or motif, grouping its overlapping parts if needed, and choosing Cut Edge. If the preview now shows a single perimeter, save a copy and make a small test cut. If it still shows an interior contour, identify whether that contour is a separate object or a hole in the same shape. Those cases need different edits.

If Cut Edge leaves a hole inside the design

Cut Edge suppresses the edges of overlapping areas; it does not magically turn a real opening into printed color. Silhouette’s official Print & Cut example has a mouth-and-nose hole that remains a cut line even with Cut Edge. The guide gives two repairs: create a solid offset background, or release the compound path so the opening becomes a separate colored piece. Work on a copy because changing a compound path alters the design.

  1. Inspect the intended result. A letter such as O may need its middle removed for a vinyl decal, while a printed sticker face may need that middle to stay intact. Do not remove functional holes just to make the preview look simpler.
  2. For a printed sticker, make a solid backing contour. Create an offset around the grouped artwork, set the original interior shapes to No Cut if necessary, and leave only the desired outer contour active. Inspect spacing and preview so a small gap does not become a second island.
  3. For editable vector art, inspect the compound path. On a duplicate, release the compound path only if you can identify the unwanted hole, recolor or remove the released piece, regroup and check Send again. Silhouette’s guide demonstrates this method; the precise result depends on the source geometry.

Do not confuse this with the Cricut double-cut diagnosis, where multi-cut settings and duplicate SVG geometry are separate causes. Here the first proof is the Silhouette Send preview.

If the source is a PNG or JPG

A raster image is pixels, not a ready-made contour. Silhouette’s cutting troubleshooting page warns that enabling Cut on an imported JPG, PNG or BMP may only cut a square around its image boundary. Use Trace: select the image area, adjust the yellow preview so the intended silhouette is covered, then choose Trace Outer Edge when you want one outside contour. The ordinary Trace command also finds inner details and can create lines you did not intend to cut.

Move the image briefly to see whether the trace made one usable outline, then undo or realign without losing the original position. Set the raster artwork to No Cut and the outline to Cut, or use the intended Print & Cut setup. Inspect small disconnected islands at high zoom. A photo with transparent gaps or specks can yield several outer contours; clean the source or simplify the trace before cutting. Silhouette’s official tracing guidance does not promise a perfect contour from every low-resolution image.

If the source is SVG or DXF

An imported vector can contain an outer perimeter, internal decoration, overlapping paths and hidden construction geometry. In Send, click the line that should remain and identify what else is selected with it. Use No Cut for decorative paths when they should print or remain visible without being cut. If one contour must be removed from a compound shape, edit a duplicate and confirm the remaining perimeter is closed and correctly sized. A visual outline in the design workspace is not proof of the final cut operation.

If Studio Basic will not open the SVG, see the edition and format guide; converting to DXF has separate sizing risks. If you need to inspect an SVG’s elements before import, Makerfern’s browser-local SVG checker can reveal structure, but it cannot see Silhouette’s Send settings. The Silhouette preparation tool can set an output width; verify the imported size and cut preview in Studio. SVG and DXF export availability and local processing details are documented separately.

A one-inch test before cutting the sheet

Duplicate the design onto a small scrap or make one small instance on the same material. Inspect the Send preview at high zoom, confirm only the desired perimeter is active, then cut and measure it. If the preview is correct but the physical result tears, shifts or fails to finish, troubleshoot blade, material and mat setup instead of deleting more vector paths. If the design is a print job, keep the printed page and Studio layout aligned; moving the artwork after printing can create a different problem.

The short decision is: Cut Edge for overlapping vector art; repair real holes separately; Trace Outer Edge for raster images; and verify the active Send lines before committing material.

Sources and dates


Makerfern's image processing runs in your browser. SVG export is free; some export and batch features require Pro. External software and materials have their own requirements. If something in this post is wrong or out of date, please tell us — the date at the top is the last time it was checked.