Elevation profile sticker for your top tube, from a GPX route
Free, in your browser, nothing uploaded: add a GPX route and get its elevation profile on a strip of the size you measure, with distance marks, the climbs found and labelled, and your aid stations. Print it at true size with cut lines, send a PNG to Print Then Cut, or cut a vinyl decal from the SVG.
Faster with the free Chrome extension: right-click any picture on a website and send it straight to the route profile sticker maker. Add to Chrome · what it does
Extension installed. Right-click any picture on a website and choose Makerfern → Open this picture in… to bring it here.
The whole route where you can see it
On a long ride or a race you want to know how far the next climb is, how steep it gets, and where the next water is, without stopping to look at a phone. A strip on the top tube or stem shows it. This tool draws your route's height at the exact size of the space you have, marks the distance, finds the climbs and puts your own points on it.
What you get
- A true-size PDF on Letter or A4, with cut lines, up to 20 copies of each strip, and a ruler to check the scale.
- A 300 dpi PNG of each strip for Print Then Cut on a cutting machine.
- An SVG and a DXF in millimetres: the strip with its cut line, or for a vinyl decal the profile's outline as one shape.
- Up to 4 strips for a long route, each starting where the last one ends.
How to use it
- Add your GPX file, or try the sample ride.
- Pick the strip size, or measure your top tube or stem and type its size.
- Add your points: aid stations, water, a turn. Set how big a climb has to be to get a label.
- Download the PDF, print it at 100% and cut it out, or take the PNG to your cutting machine.
What it does not do
- It does not read a route from a link: export the GPX file and add it.
- Its climbing total will not always match your bike computer or a race website: each counts in its own way.
- It does not print weatherproof on its own: use waterproof sticker paper or cover it with clear tape.
Questions
Where do I get a GPX file?
Most route planners and sports watch apps can export a route or a ride as GPX: look for Export, Download or Share as GPX on the route's page. Many races put their course on their website as a GPX file too. The file needs heights (elevation) in it; a planner adds them from its map, and a watch records them.
What sizes are the strips?
The presets are starting points: a top tube strip 200 x 30 mm, a stem or aero pad 127 x 38 mm, a handlebar 150 x 25 mm, and a running wrist band 220 x 32 mm. Frames and stems differ, so measure the flat part of yours with a ruler and choose Your own size to type it in. A long route can be split over up to 4 strips, each on the same height scale.
How is the climbing counted?
It depends on where the heights came from. A route drawn in a planner takes its heights from a map of the ground, which is smooth, so every rise counts: on one city marathon's official course file this counts 337 m, against the 350 m the organisers publish. A track recorded by a watch or phone has a few metres of noise in its heights, so it is smoothed over 100 m and a change counts once it passes 2 m. The tool tells you which it used. Bike computers, apps and race websites each count a little differently, so expect the number to be close to theirs, not the same.
How are the climbs found and coloured?
A climb is a rise of at least the height you set (40 m to start with) at 3% or more on average, at least 300 m long, with flat run-ins trimmed off. Each one is labelled with its average steepness and its length, with a bracket over the part of the route it covers. The fill is coloured by the steepness over a short stretch: grey under 3%, then 3%, 6%, 9%, 12% and steeper, so you can see the hard parts at a glance.
Can I add aid stations and other points?
Yes, as many as fit: type the distance from the start and a short label, such as Water, Aid 2 or Last climb. If your GPX file has its own named points on the route, one tap adds them. A label that has no room is listed, so you can shorten it, use smaller text or a longer strip.
How do I print and cut it?
Print the PDF at 100% (Actual size), never Fit to page, on sticker paper, and check the 100 mm bar with a ruler. Cut on the grey lines and round the corners, or cover the sticker with clear tape first so rain and sweat do not smear it. With a cutting machine, upload the PNG and use Print Then Cut. Cricut lists 9.94 x 7.44 inches as the most it can Print Then Cut on Letter paper with an Explore or Maker, so a 200 mm strip fits turned upright; a smaller machine takes less. If the size shown after you upload is not the strip's size, set it back.
What is the vinyl decal option?
It turns the profile into one solid shape: the outline of the route's height, on a solid base, with no text. Download the SVG or DXF and cut it from vinyl. The base keeps the low parts thick enough to weed and stick.
Is my route uploaded?
No. The GPX file is read in your browser, and the PDF, PNG, SVG and DXF are made on your device.