Mosaic pattern from a photo, printed at the real tile size
Free, in your browser, nothing uploaded: add a photo, type the size of the space and your tile size, and get a tile-by-tile pattern that prints at true size over Letter or A4 pages, every tile numbered with its colour, with a page map and the tiles to buy in each colour.
Faster with the free Chrome extension: right-click any picture on a website and send it straight to the mosaic pattern maker. Add to Chrome · what it does
Extension installed. Right-click any picture on a website and choose Makerfern → Open this picture in… to bring it here.
Lay the tiles straight onto the pattern
A mosaic from a photo needs a plan of every tile: which colour goes where, at the size you will lay them. A picture on a screen does not give you that. This tool fits whole tiles and their grout gaps into the area you have, picks the colours, and prints the plan at the real size, so you can set each tile on its square, or trace the plan onto the base.
What you get
- A true-size PDF on Letter or A4: every tile drawn at its size with its gap and its colour number, row and column numbers, shared edges to line pages up, and a 100 mm and 4 inch bar on every page.
- A first page with the whole mosaic, the page map and the colour key with the tiles to buy.
- A PNG of the finished mosaic with its grout lines.
- A CSV of the tiles in each colour, with spare.
How to use it
- Add a photo with a clear subject and strong colours, or try the sample.
- Type the width and height of the space, in centimetres or inches, and choose the tile size and gap.
- Choose how many colours, or type the tile colours you have.
- Download the PDF, print it at 100%, check the bar, and tape the pages together by the page map.
What it does not do
- It lays square tiles in a straight grid. It does not follow the lines of a picture with cut pieces, the way an opus vermiculatum mosaic does.
- It does not know a maker's colour range: match its colours to the tiles you can buy, or type your own.
- It does not show a face or fine detail with only a few tiles across: the tool tells you when the grid is coarse.
Questions
What tile sizes can I use?
The presets are 3/4 in glass (19 mm) with a 1.6 mm gap, 2 cm (20 mm) with a 2 mm gap, 1/2 in (12 mm) with a 1.2 mm gap, 3/8 in or 1 cm (10 mm) with a 1 mm gap. Your own size can be any tile from 5 to 50 mm with a gap from 0 to 6 mm. Sizes differ by maker: glass sold as "20 mm" or 3/4 inch is usually 19 mm, and one supplier says about 218 of its 3/4 inch tiles cover a square foot with a 1/16 inch gap. Measure one of your tiles and the gap you will leave, and type them in if they differ.
How big should the mosaic be for a photo to show?
It depends on how many tiles fit across. With fewer than 25 tiles on the short side you get shapes and colours: a heart, a sunset, a flower. A face or a pet needs more: 60 x 45 cm of 10 mm tiles is 54 x 41 tiles, enough for a dog to read as a dog. The tool says so when the grid is coarse. A bigger area or smaller tiles show more detail.
How do I print it at the real size?
Print the PDF at 100% (Actual size), never Fit to page, and measure the 100 mm bar with a ruler before you start. Each page holds a section of the mosaic. The first row and column of each page repeat the last ones of the page before, drawn pale with a dashed line, so you can line the pages up and tape them. The first page has a small picture of the whole mosaic, a map of the pages (A1, B1, A2...) and the colour key.
How many tiles do I need to buy?
The colour key lists how many tiles each colour needs, and how many to buy with spare for breakage and cuts (10% to start with; you can change it). The same counts download as a CSV for a spreadsheet or a shopping list.
Can I use only the tile colours I already have?
Yes. Choose Use only the tile colours I have and type each colour as a hex code and a name, one a line. Every tile takes the nearest of your colours, and the key and the PDF use your names. Otherwise the tool picks the colours from the photo (2 to 30 of them) and gives each a plain name and a hex code to match to tiles you can get.
What is the mirror option for?
For the indirect method, where tiles are stuck face down on paper or mesh and turned over when they are set. The pattern is flipped left to right so that the finished mosaic faces the right way. For the direct method, where you glue tiles face up onto the base, leave it off.
Is my photo uploaded?
No. The photo is read in your browser, and the PDF, PNG and CSV are made on your device.