Print card fronts and backs that line up, on Letter or A4
Free, in your browser, nothing uploaded: add your card pictures and a back, pick the card size, and get a PDF of card sheets with the backs mirrored behind the fronts and crop marks. A printer test on one sheet measures how far your printer moves the back side, and the backs are moved to match.
Faster with the free Chrome extension: right-click any picture on a website and send it straight to the card sheet maker. Add to Chrome · what it does
Extension installed. Right-click any picture on a website and choose Makerfern → Open this picture in… to bring it here.
Backs that land behind their fronts
Printing cards both sides is easy until the backs come out a millimetre or two off, and a card shows a sliver of the next card's back. The backs page has to be a mirror of the fronts page, and the printer adds its own small shift on the second side. This tool lays your cards out, mirrors the backs for the edge your printer flips on, and takes off the shift you measure with one test print.
What you get
- A card sheets PDF: a fronts page then its backs page, as many sheets as your deck needs, with crop marks.
- Fronts only and backs only PDFs, for printers that cannot print both sides: feed the sheets through twice.
- A fold-in-half layout: fronts and backs on one side of the page, to fold, glue and cut.
- A printer test: two rulers in half millimetres and an arrow that shows which edge your printer flips on.
How to use it
- Add your card fronts, one picture per card, and set how many copies of each. Or try the sample deck.
- Add one back for every card, or one back per card.
- Pick the card size and the paper.
- Print the printer test on one sheet, both sides, read the rulers against a light, and type in the offset.
- Print the card sheets at 100% and cut on the marks.
What it does not do
- It does not correct a printer that turns or stretches the back side; it moves the backs, measured at the middle of the page.
- It does not cut a sheet of cards into single pictures: add one picture per card.
- It does not make a small picture sharp. It tells you when a card prints under 150 dpi.
Questions
How do I get the backs to line up with the fronts?
Most printers put the second side of a sheet a millimetre or two off, and each printer is off in its own way. Download the printer test, print its two pages on one sheet, both sides, with the settings you will use for the cards, and hold it up to a light. Read where the back's two lines cross the front's rulers, to the nearest half millimetre, and type the two numbers in as the back offset. Every backs page is then moved by that much. The offset stays the same for that printer and paper, so you measure it once.
Long edge or short edge?
Most printers flip a portrait page on the long edge when they print both sides, like a book; that is the default here. The printer test shows it: the solid arrow from the back should sit inside the outline arrow on the front. If it shows at the other end of the sheet, choose the short edge and print the test again.
My printer does not print on both sides. Can I still make cards?
Yes, two ways. Print the fronts only PDF, put the printed sheets back in the tray, and print the backs only PDF; print the test the same way to measure the offset. Or choose Fold in half: the fronts go on one half of the page and the backs on the other, mirrored, so you fold on the dashed line, glue the halves together and cut the cards out. Folding needs no offset at all.
What size are the cards?
The list has the sizes card printers and sleeve makers use: poker 2.5 x 3.5 in (63.5 x 88.9 mm), the size of most card games; trading card games at 63 x 88 mm; bridge 2.25 x 3.5 in; tarot 2.75 x 4.75 in; mini 1.65 x 2.5 in; the small European board game card, 44 x 68 mm; and more. Choose Another size to type your own. 9 poker cards fit on Letter or A4 with no bleed; smaller cards are turned sideways when more fit that way.
Do I need a bleed?
A bleed is extra picture past the cut line, so a cut that drifts shows picture, not a white edge. PrintNinja asks for 1/8 inch (3 mm) on every side for printed cards. At home, 1 to 3 mm also hides a back that lands a little off, but it takes room: 6 poker cards fit on Letter with a 2 mm bleed instead of 9. If your pictures are made at the card's size, their edges are stretched into the bleed; tick My pictures already include the bleed if yours have it.
Where do I cut?
On the crop marks, the short black lines just outside the cards. With no bleed, neighbouring cards share a cut. Where the page has no room for marks inside the printer's margin, a thin grey line runs along the cut over the cards instead. A paper trimmer or a craft knife and a metal ruler gives the straightest edges.
How do I print it the right size?
Open the PDF and print at 100% (Actual size), never Fit to page: that would shrink the cards and move the backs. The printer test has a 50 mm and a 2 inch bar to measure. The tool lays the cards out; it does not set up your printer or choose your paper.
Are my pictures uploaded?
No. Your card pictures are opened and laid out in your browser, and the PDF is made on your device.