New Makerfern for Chrome: right-click any picture on the web to make a cut file, coloring page or stencil from it. Add to Chrome, free

xTool firmware notice · 9 min read

xTool security firmware: why the first Wi-Fi connection now needs confirmation

Check xTool's September 2026 security firmware: update Studio and app versions, then confirm the first Wi-Fi connection on the device.

Published 4 October 2026

After the new xTool security firmware, the first Wi-Fi connection requires confirmation on the device. xTool says USB is unaffected. For a device that received this update, use xTool Studio desktop 1.9 or later, or the xTool Studio mobile app 1.4 or later, before diagnosing the SVG or changing router settings. The firmware is rolling out by model, so the September 24 notice does not prove that your particular device has received it.

This is a connection checklist based on xTool’s security firmware notice, updated 24 September 2026. It is distinct from the earlier protocol compatibility issue involving LightBurn and Creative Space. Confirm your actual model, firmware and editor versions before applying either diagnosis.

What changed for wireless connections?

xTool describes a one-time device confirmation for the first non-USB connection after this firmware update. A waiting confirmation prompt on the machine can therefore make a healthy project look unable to reach the laser. The announcement does not say that every future Wi-Fi connection needs the same confirmation. It also says a desktop Studio version below 1.9 cannot connect wirelessly to a device that has received this security firmware; mobile users need app 1.4 or later.

The notice says the update is released in batches by model and explicitly excludes P1, P2, S1, D1, D1 Pro and M1 from this round. Do not infer a rollout date or firmware number for a model from this general notice. Use the model-specific update screen or xTool’s support channel to establish whether the security update actually installed.

Check the connection without changing the artwork

  1. Save your working project and source vector. Keep a copy of the SVG, DXF or AI file before changing software versions. A connectivity failure before the job reaches the machine does not tell you anything about vector geometry.
  2. Record the model, firmware and software version. On desktop, verify Studio is at least 1.9. On mobile, verify the Studio app is at least 1.4. If several people use one device, check every workstation: xTool warns that one person’s firmware update can leave older clients unable to connect.
  3. Look at the physical device during the first Wi-Fi reconnect. Follow its confirmation prompt if one appears. Do not repeatedly retry from the computer while a device-side confirmation is pending.
  4. Try the supported connection path. If USB works but Wi-Fi does not after this update, that difference fits the notice’s wireless-specific first-connection change. USB success does not by itself prove the network is healthy or identify the exact firmware cause.
  5. Reconnect, then inspect the actual job. Once connected, check layers, operation settings and processing preview, and frame the job using the machine’s normal safety workflow before processing material.

Desktop, mobile and shared-shop cases

For a desktop-only setup, update Studio before accepting the firmware push. xTool says the new firmware push is not delivered through desktop Studio versions below 1.9. If the machine has already been updated from another client, an older desktop install will not connect over Wi-Fi until Studio is updated.

For a shop that alternates between desktop and mobile, update both clients first. xTool warns that updating either app can lead to the firmware update, leaving the other older client unable to connect. For a shared machine, tell every user which minimum versions the machine now requires. This is a workflow issue even when the design file itself has not changed.

When is this the wrong diagnosis?

If your model is outside the announced rollout, the firmware has not installed, or Wi-Fi failed before an update, investigate the ordinary connection path: the selected device, network permissions, local network and model-specific support steps. Do not assume a failed import, frozen preview or wrong cutting dimensions is a radio problem. The complex SVG import guide addresses editor performance, while the free browser-local SVG checker inspects file structure. Neither can test a laser connection.

If you rely on LightBurn or Creative Space, read the separate model and protocol compatibility guide. The September 24 security notice does not establish that those editors support a given device or firmware. If you consider a rollback, follow xTool’s current model-specific procedure and support advice, not a version intended for another device.

Keep the design handoff independent of the connection

A saved vector source makes it easier to separate file and device faults. If you need to inspect an SVG before reopening it in Studio, Makerfern’s SVG checker runs in the browser and reports file structure without sending the artwork to Makerfern’s server. For a raster source that needs a vector, the PNG-to-SVG tool is a separate preparation step; its output still needs a Studio preview and suitable machine settings. See pricing for current free and Pro export limits and how local processing works.

Start with the dated firmware notice, verify the installed versions, watch the device for its one-time prompt and test connection before editing any artwork. If the device still will not connect, give xTool support the exact model, firmware, Studio/app version and whether USB and Wi-Fi behave differently. Also record the date the firmware changed and whether the failure happens on one computer or every workstation sharing the machine.

Sources and dates


Makerfern's image processing runs in your browser. SVG export is free; some export and batch features require Pro. External software and materials have their own requirements. If something in this post is wrong or out of date, please tell us — the date at the top is the last time it was checked.